Slip Yokes
Filters: SERIES = 1310, SPLINE DIAMETER = 1.375, | PART NUMBER | SERIES | SPLINE COUNT | SPLINE DIA. | C/L TO END | C/L TO WASHER | JOINT ANGLE | BOOT KIT | DUST CAP | NOTES | VEHICLE CLASS | BRAND |
|---|---|---|---|---|---|---|---|---|---|---|---|
2-3-7661KX |
1310 | 15/16 | 1.375 | 6.688 | 1.062 | 20 | 0 | 211121X | Slip yoke plug 2-68-143, Lube fitting 500174-1 | LD | Spicer |
| 2-3-12881X |
1310 | 15/16 | 1.375 | 6.724 | 1.417 | 0 | 211916X | 0 | Slip yoke plug 500166-22 | LD | Spicer |
| 2-3-12421X |
1310 | 15/16 | 1.375 | 7.875 | 1.500 | 0 | 211916X | 0 | Slip yoke plug 500166-22 | LD | Spicer |
| 2-3-10021X |
1310 | 15/16 | 1.375 | 6.688 | 1.062 | 20 | 0 | 0 | Relief valve in plug | LD | Spicer |
| 2-3-10411KX |
1310 | 15/16 | 1.375 | 6.000 | 1.062 | 20 | 0 | 211121X | Slip yoke plug 500166-22 | LD | Spicer |
| 2-3-178KX |
1310 | 16 | 1.375 | 3.750 | 1.000 | 15 | 0 | D2C | Slip yoke plug 3-68-23, Lube fitting 500174-1 | LD | Spicer |
| 2-3-348KX |
1310 | 16 | 1.375 | 4.188 | 1.000 | 15 | 0 | D2C | Slip yoke plug 3-68-23, Lube fitting 500174-1 | LD | Spicer |
| 2-3-12301KX |
1310 | 16 | 1.375 | 5.375 | 1.000 | 30 | 0 | 211121X | Slip yoke plug 3-68-23, Lube fitting 500174-1 | LD | Spicer |
| 2-3-128KX |
1310 | 16 | 1.375 | 5.375 | 1.000 | 15 | 0 | D2C | Commonly used short slip yoke. Used on most industrial shafts. | LD | Spicer |
| 2-3-7981KX |
1310 | 16 | 1.375 | 6.000 | 1.062 | 20 | 0 | 211121X | Slip yoke plug 2-68-143, Lube fitting 500174-1 | LD | Spicer |
| 2-3-1931KX |
1310 | 16 | 1.375 | 6.750 | 0.875 | 17 | 0 | D2M | Slip yoke plug 3-68-23, Lube fitting 500174-1 | LD | Spicer |
| 2-3-8001KX |
1310 | 16 | 1.375 | 6.812 | 1.500 | 30 | 0 | 211121X | Commonly used..... Slip yoke plug 2-68-143, Lube fitting 500174-1 |
LD | Spicer |
| 2-3-5221X |
1310 | 16 | 1.375 | 6.875 | 1.500 | 30 | 0 | D2C | Slip yoke plug 3-68-23, Lube fitting 500174-1 | LD | Spicer |
| 2-3-5821X |
1310 | 16 | 1.375 | 7.875 | 1.500 | 0 | 0 | D3E | Slip yoke plug 3-68-23, Lube fitting 500174-1 | LD | Spicer |
| 2-3-8021KX |
1310 | 16 | 1.375 | 7.875 | 1.500 | 30 | 0 | 211121X | Commonly used long travel on 4X4 | LD | Spicer |
| 3103-162 |
1310 | 16 | 1.375 | 7.875 | 1.500 | 30 | 0 | 3186-137R | Commonly used long travel on 4X4 | LD | PTI |
| P2-3-8001KX |
1310 | 16 | 1.375 | 6.812 | 1.500 | 30 | 0 | 211121X | Forged | LD | PTI |
| P2-3-8021KX |
1310 | 16 | 1.375 | 7.875 | 1.500 | 30 | 0 | 211121x | Forged | LD | PTI |
| 3103-161 |
1310 | 16 | 1.375 | 6.812 | 1.500 | 30 | 0 | 3186-137R | "R" dust cap is a full circle and "S" is for full spline stubs | LD | PTI |
| P2-3-128KX |
1310 | 16 | 1.375 | 5.375 | 1.000 | 15 | 0 | D2C | Commonly used short slip yoke. Used on most industrial shafts. | LD | PTI |
| N2-3-7171KX |
1310 | 31/32 | 1.375 | 6.625 | 1.531 | 30 | 0 | ND3A | Used on GM 4X4 front shafts but is shorter than the original part and the shaft must be retubed. Better to use Neapco N2-3-9165KX | LD | Neapco |
| 2-3-10261KX |
1310 | 31/32 | 1.375 | 6.750 | 0.875 | 10 | 0 | 211121X | LD | Spicer | |
| N2-3-9165KX |
1310 | 31/32 | 1.375 | 7.375 | 1.360 | 22 | 0 | ND3A | Commonly used on GM front 4X4 shafts with long slip | LD | Neapco |
